WATERBASED

HOUSE PAINT

acrylic emulsion paint for professionals

New generation acrylic emulsion paint based on a set of state-of-the art raw materials. Good resistance to frequent washing. Suitable for interior and exterior concrete, plaster, gypsum board, etc. A cost-effective and reliable solution for professionals. Ultimate hiding power. Suitable for painting and refreshing frequently repainted areas, such as public buildings, ceilings, warehouses.

high coverage and hiding power
withstands frequent washing
smooth and velvet finish

BUILDINGS
INTERIOR-EXTERIOR USE

matt

Finish

TOOLS

THINNING

1-2 hr

DRYING TIME

4-6 hrs

OVERCOATING INTERVAL

1- 2

RECOMMENDED COATS

10		2
m²/L

SPREADING RATES

Preparation

Carefully prepare surface to obtain good results. Surface must be clean, dry and free from defective or non-cohesive material, dust, oils and salts.

► New porous plaster, concrete, brick, cement:
Prime with FERM (H₂O) thinned up to 50-100% with water. Apply 2 coats of HOUSE PAINT.
► Sound previously painted substrates:
Apply 2 coats of HOUSE PAINT.

Use

Roller, brush or spray airless. Thin by 5-15% with water.

► Stir well before and during application.
► Allow newly poured concrete to cure for 30 days, then prime with FERM (H₂O).
► For best results, surfaces should not be exposed to direct sunlight during paint application.